Exposure monitoring as a program, not a one-time sample
Monitor on a cadence. Close the loop in software.
Plan → Sample → Interpret → Control → Re-sample with CIH oversight and Provisio EHS tracking.
Scope a Monitoring Program
Fill out the form below and we'll get back to you within 24 hours. You can also request examples of our work.
Some of Our Clients
What Exposure Monitoring Is NOT
Pump Drop + PDF
Consultant drops pumps, lab sends results, PDF lands in a shared drive. No interpretation. No controls. No follow-up.
Panic-Only Sampling
Sample when OSHA shows up or an employee complains. Reactive, scattered, and defensible only if you're lucky.
Software-Free Paper Piles
Lab reports stacked in a binder. Nobody tracks whether controls were implemented or when re-sampling is due.
Exposure Monitoring Program Flow
A structured program moves from characterization through control verification, not a one-and-done sample.
Characterize
Inventory hazards, map similar exposure groups (SEGs), and prioritize monitoring. Know what you're exposed to before you sample.
Plan
Design a sampling strategy: what to sample, where, when, how many samples, and what regulatory context applies (PELs, RELs, TLVs).
Sample
Deploy calibrated sampling equipment with proper chain-of-custody. Personal and area samples per the plan. Lab coordination included.
Interpret
A CIH interprets results against applicable limits, evaluates exposure profiles, and determines whether controls are adequate or action is required.
Control
Recommend engineering, administrative, or PPE controls. Specify verification criteria. Findings enter Provisio EHS as corrective actions with owners and due dates.
Record
Document everything in Provisio EHS: sampling results, interpretations, control recommendations, CAPA status, and verification photos.
Repeat
Schedule follow-up sampling per cadence requirements or process changes. Loop back to Step 3 and close the cycle.
Exposure Monitoring Modules
We monitor what your operation requires. Common modules are listed below; scope varies by facility and exposure profile.
Noise & Hearing Conservation
Personal dosimetry, area measurements, octave band analysis, hearing conservation program support, and audiometric coordination.
Silica Monitoring
Respirable crystalline silica sampling per OSHA 1926.1153/1910.1053, interpretation, control recommendations, and Table 1 compliance support.
Welding Fumes & Metals
Metal fume exposure assessment for chromium, nickel, manganese, and other welding byproducts. LEV evaluation and PPE selection guidance.
Solvents & VOCs
Volatile organic compound sampling for paint operations, degreasing, coating, and chemical processes. Control verification included.
Construction Multi-Employer
Exposure monitoring for GCs and subs: silica, noise, lead, and other construction-specific hazards. Multi-employer documentation.
Control Verification
Follow-up sampling to verify engineering and administrative controls reduced exposures as intended. Close the loop with data.
Provisio EHS Integration
Exposure monitoring findings don't die in a PDF. They become tracked corrective actions in Provisio EHS.
Findings as CAPA
Sampling results that require action enter Provisio EHS as corrective actions with owners, due dates, and priority.
Control Verification
When controls are implemented, upload verification photos and close the action. Audit-ready documentation.
Management Reporting
Pull reports for leadership review: open CAPAs, overdue actions, exposure trends, and program status.
The Next Generation of Safety Consultations
A traditional consultant gives you a report of findings. Provisio gives you a solution: audit findings turned into tracked corrective actions inside Provisio Core.
Step 01: Intelligent Discovery
Expert-led OSHA compliance audits that provide more than just a PDF report; they provide a roadmap.
Step 02: Actionable Implementation
We break down findings into specific tasks within the Provisio Core, ready for immediate assignment.
Step 03: Performance & Scale
Empower your team with individual accountability and data-driven insights to maintain a 100% compliance rate.
What Working With Provisio Looks Like
A clear, structured process from first call to measurable improvements.
Discovery Call
Week 020-30 minutes to understand your operations, risks, and objectives. We determine whether you need audits, sampling, program development, or fractional support.
Proposal & Scope
Week 1You receive a clear proposal with scope, deliverables, timeline, and pricing. No hidden fees. No vague language.
On-Site Work & Data Collection
Weeks 2-4We conduct audits, sampling, interviews, and document reviews. You'll always know who is on-site and what they're doing.
Findings & Recommendations
Weeks 4-6You receive a prioritized report, mapped to regulations, with practical recommendations and estimated effort.