If you cut, finish or install engineered stone, or you oversee silica exposure for those crews, OSHA's recent numbers are worth a close look. They are not from an OSHA news release. Jennifer Kim, Director of OSHA's Office of Health Enforcement, shared them on a CPWR Ask OSHA webinar on October 20, 2026, as reported by Safety+Health on November 4, 2026. The takeaway is simple: the engineered stone Focused Inspection Initiative is active, overexposures are still showing up, and the citations cluster around written programs and Table 1 controls.
What OSHA said
According to Safety+Health's report of the webinar, OSHA's Focused Inspection Initiative for engineered stone fabrication and installation, launched in September 2023, has done 502 inspections. That compares with 9 inspections in the covered industries before the initiative. The initiative sits on top of OSHA's respirable crystalline silica National Emphasis Program (NEP), CPL 03-00-023, which took effect February 4, 2020.
Kim also reported the sampling picture. Of 1,000-plus air samples tied to initiative-driven inspections, 22.3% were over the permissible exposure limit (PEL). That 22.3% includes 2.8% at five times the PEL or more, and 0.9% at 10 times the PEL or more. Safety+Health quotes Kim saying those results underscore the need for exposure assessments and adequate controls, and for not relying on personal protective equipment alone. This post does not convert those percentages into a sample count.
The Safety+Health article is here: OSHA panel gives update on efforts to reduce worker exposure to silica. The webinar slides are posted by CPWR: Ask OSHA Silica Webinar slides (PDF).
What inspectors are citing
Under the silica NEP, the top alleged cite Kim flagged was 29 CFR 1926.1153(c)(1): Table 1 controls not implemented. Table 1 lives in the construction silica standard. For listed construction tasks, the employer must fully and properly implement the specified controls, or assess and limit exposure under paragraph (d) instead.
The CPWR webinar slides separately list the most frequent alleged cites under the engineered stone initiative itself. Those two initiative cites appear on the slides and are not reported in the Safety+Health article, so treat them as webinar-slide data:
- 29 CFR 1910.1200(e)(1): no written hazard communication program.
- 29 CFR 1910.1053(f)(2)(i): no written exposure control plan.
(The slide print of the second cite uses a typo form. The eCFR written-plan duty is (f)(2)(i).)
Together, the pattern is clear. Inspectors are finding missing written programs and gaps where Table 1 controls were supposed to be in use.
What's next on Table 1
Do not wait for a new Table 1. Safety+Health reports that a potential Table 1 revision sits on the Department of Labor's long-term regulatory agenda only. That means no near-term rewrite is queued. The current Table 1 methods, and the alternative assessment path under 1926.1153(d), are what apply today.
A practical checklist
Use this as a quick walk-through before the next silica job or inspection:
- Confirm a written HazCom program is in place (1910.1200(e)(1)) and that it covers respirable crystalline silica (1910.1053(j)(1); construction: 1926.1153(i)(1)).
- Confirm a written exposure control plan is in place and in use (1910.1053(f)(2)(i); construction: 1926.1153(g)).
- For Table 1 construction tasks, confirm the listed controls are actually used (1926.1153(c)(1)), or assess under (d).
- Refresh exposure assessments. Do not rely on PPE alone when samples show overexposures.
Questions about silica exposure assessments or written programs? Call Provisio EHS at 385-316-2837.
Sources
All retrieved Thursday, November 5, 2026 (America/Denver):
- Safety+Health, Kevin Druley, Nov 4, 2026: https://www.safetyandhealthmagazine.com/osha-panel-gives-update-on-efforts-to-reduce-worker-exposure-to-silica/
- CPWR Ask OSHA Silica Webinar slides, Oct 20, 2026: https://www.cpwr.com/wp-content/uploads/Ask-OSHA-Silica-Webinar-slides.pdf
- OSHA silica NEP, CPL 03-00-023 (effective Feb 4, 2020): https://www.osha.gov/enforcement/directives/cpl-03-00-023
- 29 CFR 1926.1153 (construction silica): https://www.ecfr.gov/current/title-29/section-1926.1153
- 29 CFR 1910.1053 (general industry silica): https://www.ecfr.gov/current/title-29/section-1910.1053
- 29 CFR 1910.1200 (HazCom): https://www.ecfr.gov/current/title-29/section-1910.1200
Ready to Improve Your Safety Management?
Explore Provisio EHS solutions to streamline compliance and protect your workforce.
Schedule Your OSHA Audit
Let our industrial hygiene professionals identify your compliance gaps before regulators do.
Try Provisio EHS Free
Get 30 days of full access to our safety management platform. No credit card required.
Start Your Free TrialSee How It Works Together
Explore our Audit + Software Implementation Bundle. Get compliant and automate faster.
Get Bundle Pricing
